用户您好，请详细描述您所遇到的问题，这会帮助我们快速定位问题~
1.芯片型号：J5
2.天工开物开发包OpenExplorer版本：J5_OE_1.1.62
3.问题定位：板端部署
4.问题具体描述：将 vdsp_rpc_sample/script 目录拷贝到j5开发板上，然后运行 script/cv 目录下的 run_cv_test.sh 脚本,报错：
root@MADC2.0:/userdata/DSP/cv# sh run_cv_test.sh
I0000 00:00:00.000000 1769 vlog_is_on.cc:197] RAW: Set VLOG level for “*” to 3
I0101 08:35:15.452503 1769 test_bilateral_filter.cc:25] bilateralFilter begin
I0101 08:35:15.455555 1769 test_bilateral_filter.cc:37] read image data/input.jpg success
I0101 08:35:15.456629 1769 test_bilateral_filter.cc:78] rpc begin
[DSP] DSP version = 0.3.19
[A][DSP]initializer.cc:41][[01-01][08:35:15:457:18]] Init logger, level:3
[A][DSP]initializer.cc:56][[01-01][08:35:15:457:68]] Relay server mode
[I][DSP][engine.cc:589][[01-01][08:35:15:457:889]] Start thread for receive msg from relay server
[E][DSP][log.cc:121][[01-01][08:35:15:558:607]] Wait config task done failed, error code:-7000003
[E][DSP][log.cc:39][[01-01][08:35:15:558:824]] Set log level of dsp core 0 failed, error code:-7000003
[E][DSP][log.cc:62][[01-01][08:35:15:558:865]] Dsp core 2 service not available
[E][DSP][log.cc:42][[01-01][08:35:15:558:892]] Set log level of dsp core 1 failed, error code:-7000005
